g211750
Figure 32
Reelmaster 5610-D
1.
Muffler clamp
5.
Washer-head screw (2 each)
9.
Tailpipe bracket
2.
Exhaust tube
6.
Tailpipe guard
10.
Flange nut (2 each)
3.
Flange-head screw (2 each)
7.
Flange-head screw (2 each)
11.
Diesel-particulate filter assembly
(DPF includes DOC)
4.
Exhaust clamp
8.
Tailpipe bracket
12.
Engine
The exhaust system used in Reelmaster requires a diesel exhaust particulate
filter (DPF). The DPF includes a Diesel Oxidation Catalyst (DOC), a Soot
Filter (SF), a temperature sensor, and a pressure differential sensor. Under
normal circumstances, the diesel oxidation catalyst requires replacement at
approximately 6,000 hours. Under normal circumstances, the soot filter requires
reconditioning or replacement at approximately 6,000 hours. Reconditioning the
soot filter requires special equipment and should only be done by a company
familiar with the reconditioning process. An alarm timer in the engine ECU must
be reset when the soot filter is reconditioned or replaced. Contact an Authorized
Toro Distributor for assistance.
Refer to the
Yanmar Engine Service Manual
for information on servicing,
removing, and installing the DPF and its components. The following procedures
describe removing and installing the remainder of the exhaust system (not
including the diesel exhaust particulate filter (DPF).
Removing the Exhaust System
CAUTION
A hot engine and exhaust system can cause burns.
Allow the engine and the exhaust system to cool before working
on or near them.
1. Park the machine on a level surface, lower the cutting decks, shut off the
engine, set the parking brake, and remove the key from the key switch.
Yanmar Diesel Engine: Service and Repairs
Page 4–16
Reelmaster
®
5410/5510/5610 Series
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
