Toro Reelmaster 5510 Series, Service Manual

Page: 409 / 662

Adjusting the Mow/Transport Switch (continued)
g213869
Figure 226
1. Mow speed limiter 2. Gap 3. Mow/transport switch
2. The gap ( Figure 226 ) between the mow/transport switch and the mow speed
limiter should be 2.4 to 2.5 mm (0.094 to 0.100 inch) .
3. If gap is incorrect, loosen the jam nuts that secure the switch to the footrest
platform. Position the switch with jam nuts to allow correct gap between
the switch and the mow speed limiter. Tighten the jam nuts to secure the
adjustment. Torque the jam nuts to
18.4 to 22.4 N∙m (162 to 198 in-lb) . After
the jam nuts are tightened, ensure that clearance between the head of the
mow/transport switch and the mow speed limiter has not changed.
4. After adjustment to the mow/transport switch, use the InfoCenter display
to verify that the mow/transport switch and circuit wiring are functioning
correctly; refer to
Using the InfoCenter Display for Troubleshooting (page
7–28) .
Reelmaster ® 5410/5510/5610 Series Page 7–53 Electrical System: Adjustments
15216SL Rev C