
Processing
X
TRA
Operator’s Manual
20077/021 US
5-3
Chapter 7: Automated Functions
for a description of the Autostart, Continue, and BQW
functions.
3. Message Area
The top of the screen consists of the message area which contains informational messages (including
warnings, alarms, and on-screen instructions) and the Help button. Refer to
for an explanation of warnings and alarms.
4. Button Bar
At the bottom of the screen is the button bar. Many of the buttons which may appear in the button bar
are only present during certain protocols and phases. Refer to the section “Factory Protocols” on page
5-22 for a detailed description of each.
The Displets
The largest region of the processing screens consists of up to five display applets called
displets
(see
“Screen Structure” on page 5-2 for a description of the typical autotransfusion (ATS) processing screen
structure). Each displet contains a related grouping of status displays and controls for one portion of
the system.
With the exception of the processing displet in the center of the screen which is always present and
open, each displet may be independently opened or closed. A closed displet has its content hidden,
while an open displet’s content is visible. Pressing the title bar of a closed displet opens it; conversely,
pressing the title bar of an open displet closes it. Figure 5-5 shows the reservoir displet in first its open
and then its closed state.
Whether a displet is opened or closed at wakeup can be configured from the configuration mode
screen (see
Reservoir Displet
Figure 5-5 Reservoir Displet (Open and Closed)
When present, the Reservoir displet is located in the upper-left corner of the displet area. The large
field within the reservoir displet displays the volume of fluid currently in the collection reservoir (ml).
If the Autostart function is enabled, the Reservoir displet also contains a smaller autostart volume text
box (as in Figure 5-5). The value of the autostart volume may be adjusted in the same manner as all
other X
TRA
parameters: touch the text box, increase or decrease the volume using the arrow keys,
touch the text box a second time to save the new volume (see “Modification of Parameters” on page
5-5 for further instruction on modifying parameters using the touch screen interface). Refer to
for information on the Autostart function.
The Reservoir displet is not visible if Reservoir Type in the settings tab has been set to “none” (refer to
“Settings Tab” on page 5-48).
Vacuum Displet
Figure 5-6 Vacuum Displet
When the X
VAC
vacuum module is installed, the Vacuum displet is present in the lower-left corner of
the displet area. The controls in the Vacuum displet are used to control the X
VAC
vacuum module.
1 Displet title bar
1
Summary of Contents for 75220
