sorin 75220, Operator'S Manual, Page: 157 / 304

Configuring X
TRA
X
TRA
Operator’s Manual
20077/021 US
8-1
Chapter 8: Configuring X
TRA
Description
The X
TRA
system includes a number of settings and optional features that may be configured.
Because modifying system settings affects the operational conditions of the machine, they may only
be modified before starting a new case.
However, after a case has been started, the current settings may be viewed, but not
modified, from the Settings tab of the Menu Screen (by touching the View button).
Without entering a password, a limited number of system settings may be modified directly from the
Settings tab of the Menu Screen:
• Anticoagulant type
• Reservoir type
• Vacuum mode
• Date and time
These settings are described in “The Settings Tab of the Menu Screen” on page 8-2.
The general configuration of the X
TRA
system, consisting of the majority of settings, can be set in a
protected domain, the Configuration Mode Screen, accessible from the Settings tab of the Menu
Screen after entering a password. The settings programmed from the Configuration Mode Screen are
permanently kept in the systems’s memory and cannot be modified from any other screen.
The Configuration Mode Screen is divided into several tabs, each of which contains a group of settings
for a related part of the system:
• Features
• Protocol Set
• Wake up
• Display
• Warnings
• ID
• Language
The section “Configuration Mode” on page 8-2 explains how to enter the Configuration Mode Screen
and describes each tab of the screen.