sorin 75220, Operator'S Manual, Page: 225 / 304

Vacuum Module
X
TRA
Operator’s Manual
20077/021 US
13-3
Preliminary Setup
To use the X
VAC
, attach the vacuum line from the blood collection reservoir vacuum port to the inlet
port on the lid of the vacuum overflow trap. Refer to “Step 3: Setup of the Vacuum Line” on page 4-6.
Refer to
Chapter 15: Maintenance
for information about removing the vacuum overflow trap for
cleaning.
Figure 13-2 Vacuum Line Connecting Reservoir to Inlet Port
Performing a Blood Collection Procedure With the X
VAC
Module
X
VAC
Used Through the X
TRA
System Touch Screen Interface (Remote
Control)
The X
VAC
vacuum module may be used in combination with the X
TRA
system when it is installed into
the X
TRA
cart and is connected to the X
TRA
via the power and serial communications cables:
1. Connect the X
VAC
to the X
TRA
power supply (see Figure 13-3).
2. Connect the X
VAC
RS422 female serial connector to the X
TRA
RS422 female serial connector using
the DB9 male to DB9 male cable (see Figure 13-3).
1
1 Vacuum port (yellow capped)
2 Vacuum inlet port
2