sorin 75220, Operator'S Manual, Page: 184 / 304

Preoperative Sequestration (PPP and PRP)
10-6
20077/021 US
X
TRA
Operator’s Manual
Note: The Procedure Set can be used instead of sets indicated in points 2 and 3.
Installing the Blood Collection Reservoir, Connecting the Aspiration Line,
Setup of the Vacuum Line, Installing the Bowl Set
For general information about installing disposables, refer to
Chapter 4: Installing the Disposables
.
1. Follow Steps 1-4 in
Chapter 4: Installing the Disposables
: “Step 1: Installing the Blood Collection
Reservoir” on page 4-3, “Step 2: Connecting the Suction Line” on page 4-4, “Step 3: Setup of the
Vacuum Line” on page 4-6, and “Step 4: Installing the Bowl Set” on page 4-7.
2. Hang the Waste bag on the two lower hangers located on the right panel of the machine.
3. Do not clamp the top of the Waste bag.
Note: Do not connect the Waste bag to the bowl outlet tubing at this time.
Connecting the 4-Way Adapter
Figure 10-2 Sequestration Set 4-Way Connection
4. Open the X
TRA
Sequestration Set
5. Remove the 4-way adapter from the package
6. Connect the inlet port of the 4-Way adapter to the port on the bowl outlet tubing
7. Connect the inlet port of the Waste bag to the port of the branch of the 4-way adapter with the
white clamp
CAUTION
Use aseptic technique when installing disposables.