sorin 75220, Operator'S Manual, Page: 120 / 304

Processing
5-38
20077/021 US
X
TRA
Operator’s Manual
5. Menu Button
Touching the menu button will bring up the Menu Screen. Various X
TRA
settings can be
adjusted from the Menu Screen. Touching the close button in the Menu Screen will close the
Menu Screen and display the previously displayed screen. Refer to the section “Menu Screen”
on page 5-44.
Ready Screen
Once the X
TRA
has completely loaded, the Ready Screen is displayed on the touch screen display. The
Ready Screen is used to begin each processing cycle (see Figure 5-36).
Figure 5-36 Ready Screen
1. Start Button
Touching the Start button begins a processing cycle and displays the Processing Screen
(refer to “Processing Screen” on page 5-39). In case a cycle is interrupted by pressing the
Stop button, touching the Start button resumes processing from the state the processing
phase was in when it was stopped.
2. “Special” Button
Touching the “Special” button displays the Special Cycles Menu (refer to “The Special Cycles
Screen” on page 6-1).
3. Menu Button
Touching the menu button will bring up the Menu Screen. Various X
TRA
settings can be
adjusted from the Menu Screen. Touching the close button in the Menu Screen will close the
Menu Screen and display the previously displayed screen. Refer to the section “Menu Screen”
on page 5-44.
4. Processed Volume
If a cycle has already been run in the current case, the processing displet of the Ready Screen
contains a multi-bowl icon and a text field which displays the total volume of fluid processed in
the case so far (ml).
5
6
4 Processed volume 1 Start button
5 Emergency button 2 “Special” button
6 “End Case” button 3 Menu button
4
1
2
3