manualshive.com logo in svg

Simrad GO XSE Series, Operator'S Manual

The Simrad GO XSE Series offers exceptional navigational capabilities and advanced features. Ensure seamless installation with the comprehensive "Installation Manual" available for "free download" at manualshive.com. This detailed "manual" provides step-by-step instructions for setting up your device, optimizing your experience on the water.

Share
Download
background image

Icon

Definition

Autopilot turns - autopilot is turning the vessel in a
turn mode: C turn, Depth turn, S turns, Spiral turn,
Square turn, ZigZag turns. In most cases, when the
turn is completed the turn icon is replaced with an
autopilot mode icon. Use the autopilot controller to
select an autopilot turn or cancel the turn.
Downloading files, e.g.: software update file, logs
from C-MAP Genesis, GRIB weather files, PredictWind
routes, etc.

The unit is connected to the internet. The unit can
be used to download or upload files to the internet.

GPS signal strength: strong, medium, and weak. The
placement of the GPS and obstructions between it
and satellites can affect the signal strength. In some
cases, a well-placed external GPS antenna might be
needed.

GPS signal strength with the Wide Area
Augmentation System (WAAS) is strong, medium,
and weak.

An external keyboard is connected to the unit.

An external mouse is connected to the unit.

A mobile (cell) phone is connected to the unit via
Bluetooth.

The system is simulating. Turn ON/OFF the simulator
from the simulator settings dialog.

Radar is paused. If you want the radar to transmit,
select the transmit option in the Radar page menu.

238

Appendix

 | GO XSE/XSR Operator Manual

Summary of Contents for GO XSE Series



















































































































































































































































Reviews:

No comments

Related manuals for GO XSE Series

Daavlin 7 Series Operation Manual preview
7 Series
Brand: Daavlin Pages: 13
Daavlin 7 Series Operating Instructions Manual preview
7 Series
Brand: Daavlin Pages: 27
ABB E-Hub 2.0 Getting Started preview
E-Hub 2.0
Brand: ABB Pages: 18
R-Tech X5 Quick Manual preview
X5
Brand: R-Tech Pages: 3
Panasonic LP-GS Series Serial Communication Command Manual preview
LP-GS Series
Brand: Panasonic Pages: 180
CAIRE FreeStyle Comfort Technical Manual preview
FreeStyle Comfort
Brand: CAIRE Pages: 33
Parkside PFMR 1600 A1 Operation And Safety Notes preview
PFMR 1600 A1
Brand: Parkside Pages: 95
Tanaka APM-7 Instruction Manual preview
APM-7
Brand: Tanaka Pages: 20
Tandem AutoSoft 90 Indications For Use preview
AutoSoft 90
Brand: Tandem Pages: 80
Tanco E100 SA Quick Reference Manual preview
E100 SA
Brand: Tanco Pages: 4
Abus FUSG50101 Quick Manual preview
FUSG50101
Brand: Abus Pages: 12
Garmat Chinook II Operation And Maintenance Manual preview
Chinook II
Brand: Garmat Pages: 13
Gama Sonic 77i50265 Instruction Manual preview
77i50265
Brand: Gama Sonic Pages: 4
Kobelt 2588 Owner'S Operation, Installation & Maintenance Manual preview
2588
Brand: Kobelt Pages: 20
Pottinger SERVO 55 Operator'S Manual preview
SERVO 55
Brand: Pottinger Pages: 39
WAGNER 0241623 Operating Manual preview
0241623
Brand: WAGNER Pages: 20
impact VE-TTLHX32 Instructions Manual preview
VE-TTLHX32
Brand: impact Pages: 12
Otto Bock ProCarve Quick Reference Manual preview
ProCarve
Brand: Otto Bock Pages: 20

Brands by name

Popular brands

Load more brands