Simrad GO XSE Series, Operator'S Manual

Page: 140 / 242

• Save the waypoint
- The waypoint is saved to your waypoint list. This waypoint
name is prefixed with MOB AIS SART - followed by the unique
MMSI number of the SART. For example, MOB AIS SART -
12345678.
• Activate the MOB function
- The display switches to a zoomed chart panel, centered on the
AIS SART position.
- The system creates an active route to the AIS SART position.
Ú
Note:
If the MOB function is already active, this will be
terminated and replaced by the new route towards the AIS
SART position.
Ú
Note:
If the AIS stops receiving the AIS SART message, the AIS
SART remains in the vessels list for 10 minutes after it receives
the last signal.
Vessel alarms
You can define several alarms to alert you if a target shows up
within predefined range limits, or if a previously identified target is
lost.
Ú
Note:
For the system to display dangerous target alert
messages when dangerous targets are detected, the
Dangerous vessel option must be enabled.
Dangerous targets
AIS targets are defined as dangerous targets in the Vessels and
tracked targets dialog (TCPA/CPA settings), refer to
"Vessels and tracked
targets"
on page 144.
140
AIS | GO XSE/XSR Operator Manual