manualshive.com logo in svg

Simrad GO XSE Series, Operator'S Manual

The Simrad GO XSE Series offers exceptional navigational capabilities and advanced features. Ensure seamless installation with the comprehensive "Installation Manual" available for "free download" at manualshive.com. This detailed "manual" provides step-by-step instructions for setting up your device, optimizing your experience on the water.

Share
Download
background image

5

Tracked moving radar target with course extension.
Shows the tracked target ring and the target ID
number.

8

Tracked dangerous radar moving target (yellow),
with trail when target history is enabled. The yellow
color is shown when the radar palette is black/red or
black/green. Shows the tracked target ring and the
target ID number.

3

Tracked dangerous radar moving target (purple),
with trail when the target history is enabled. The
purple color is shown when the radar palette is
white/red. Shows the tracked target ring and the
target ID number.

4

Tracked dangerous radar moving target (red), with
trail when target history is enabled. The red color is
shown when the radar palette is black/yellow. Shows
the tracked target ring and the target ID number.

8

Tracked associated target. Shows the tracked target
ring and the target ID number. When the radar and
the AIS signal acquire the same target for tracking,
the system will display the target with one symbol.
This reduces the number of AIS symbols and radar
targets on the PPI. The association function also
compensates for a possible failure in one of the two
targets, e.g., if the radar tracked target is positioned
behind an island, the system keeps tracking and
visualizing the AIS target.

Ú

Note: 

The tracked radar target continues to be

analyzed by the system when the target
association is active.

Selected radar target.

Lost radar target.

120

Radar

 | GO XSE/XSR Operator Manual

Summary of Contents for GO XSE Series



















































































































































































































































Reviews:

No comments

Related manuals for GO XSE Series

Varec 6700 Installation And Operation Instructions Manual preview
6700
Brand: Varec Pages: 74
Halyard MIC Series Instructions For Use Manual preview
MIC Series
Brand: Halyard Pages: 84
PAIDI Twist Instructions For Use Manual preview
Twist
Brand: PAIDI Pages: 48
Kapriol 27977 Manufacturer'S Instruction And Information preview
27977
Brand: Kapriol Pages: 32
JABO 4236 Installation Manual preview
4236
Brand: JABO Pages: 4
Tacx Cosmos Assembling Instructions preview
Cosmos
Brand: Tacx Pages: 2
C.E. Nierhoff & Co C520 Troubleshooting Manual preview
C520
Brand: C.E. Nierhoff & Co Pages: 7
TC Electronic M5000 Hardware Installation preview
M5000
Brand: TC Electronic Pages: 2
Bahco BBT80 Operating Instructions Manual preview
BBT80
Brand: Bahco Pages: 131
Bahco BBT60A Original Instructions Manual preview
BBT60A
Brand: Bahco Pages: 126
ZIGBEE 624 Quick Start Manual preview
624
Brand: ZIGBEE Pages: 4
CAIRE Companion 5 Provider Technical Manual preview
Companion 5
Brand: CAIRE Pages: 38
Caframo BDC2002 Instruction Manual preview
BDC2002
Brand: Caframo Pages: 72
Yamaha MCX-C15 - MusicCAST Network Audio Player Owner'S Manual preview
MCX-C15 - MusicCAST Network Audio Player
Brand: Yamaha Pages: 65
Yamaha Audiogram6 Manuel Du Propriétaire preview
Audiogram6
Brand: Yamaha Pages: 24
MAGSTIM NEUROSIGN V4 User Manual preview
NEUROSIGN V4
Brand: MAGSTIM Pages: 86
U-Line H-8379 Manual preview
H-8379
Brand: U-Line Pages: 6
Yacht Devices YDVR-03R User Manual preview
YDVR-03R
Brand: Yacht Devices Pages: 32

Brands by name

Popular brands

Load more brands