manualshive.com logo in svg

Simrad GO XSE Series, Operator'S Manual

The Simrad GO XSE Series offers exceptional navigational capabilities and advanced features. Ensure seamless installation with the comprehensive "Installation Manual" available for "free download" at manualshive.com. This detailed "manual" provides step-by-step instructions for setting up your device, optimizing your experience on the water.

Share
Download
background image

Displaying GRIB weather as overlay

Imported GRIB weather data can be displayed as an overlay on your
chart panel.
When the GRIB weather overlay option is selected, the chart menu
increases to show GRIB weather options. From this menu you can
select which weather symbols you want to display, set the distance
between the barbs, and adjust the opaqueness of the weather
symbols.

A

Wind barbs

B

Pressure contours

C

GRIB information window

GRIB information window

The GRIB information window shows the date and time for the GRIB
weather forecast, and the selected forecast time in brackets. A
negative value in the brackets indicates historic weather data.
If you select a position on the chart, the information window
expands to include weather details for the selected position.

Animating GRIB weather forecast

The GRIB data contains forecast information for a set number of
days. It is possible to animate the weather data and to show the
predicted forecast for a specific time and date. The time scales vary
depending on the file you are using.
The time shift is shown in brackets in the GRIB information window.
The time is relative to the current time as provided by a GPS device
connected to the system.

Weather

 | GO XSE/XSR Operator Manual

189

Summary of Contents for GO XSE Series



















































































































































































































































Reviews:

No comments

Related manuals for GO XSE Series

Qazqa Movie FL Black E27 Flaps Instruction Manual preview
Movie FL Black E27 Flaps
Brand: Qazqa Pages: 2
Quincy lab GC Series Operating Manual preview
GC Series
Brand: Quincy lab Pages: 4
MADRIX NEO Quick Start Manual & Technical Manual preview
NEO
Brand: MADRIX Pages: 12
Narcotrend Compact M Operating Instructions Manual preview
Compact M
Brand: Narcotrend Pages: 47
Cameo SCUBA User Manual preview
SCUBA
Brand: Cameo Pages: 64
Cameo OPUS Series User Manual preview
OPUS Series
Brand: Cameo Pages: 100
CAME PXTS4.3 Installer Manual preview
PXTS4.3
Brand: CAME Pages: 32
Federal Signal Corporation VECTOR Installation And Maintenance Instructions preview
VECTOR
Brand: Federal Signal Corporation Pages: 2
Harman Kardon EQ8 Owner'S Manual preview
EQ8
Brand: Harman Kardon Pages: 7
GE Voluson E8 Quick Manual preview
Voluson E8
Brand: GE Pages: 37
Sota YumaLite YL1 Manual preview
YumaLite YL1
Brand: Sota Pages: 7
ALL-FILL VF100e Installation & Maintenance Manual preview
VF100e
Brand: ALL-FILL Pages: 32
Blatchford ESK+ Manual Knee Lock Instructions For Use Manual preview
ESK+ Manual Knee Lock
Brand: Blatchford Pages: 172
HEINE OPTOTECHNIK iC2 Funduscope Manual preview
iC2 Funduscope
Brand: HEINE OPTOTECHNIK Pages: 52
Ugin ARTIS NEO Instructions For Use Manual preview
ARTIS NEO
Brand: Ugin Pages: 39
Biosonic Suvi Elite Quick Start Manual preview
Suvi Elite
Brand: Biosonic Pages: 2
Petzl NAVAHO BOD Instructions For Use Manual preview
NAVAHO BOD
Brand: Petzl Pages: 7
SHOWTEC RGB Studio Beam Driver Product Manual preview
RGB Studio Beam Driver
Brand: SHOWTEC Pages: 16

Brands by name

Popular brands

Load more brands