User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
logical channel
named
'Temperature'
).
Similarly, to go directly to the configuration of a displayed
Group
, touch and hold
the group number
or
group name
in the upper
Information bar
for a few
seconds (see option
(2)
Group
named
'Group 4'
). In both cases if a password is set (see
Chapter 7.17. ACCESS
) then the user has to enter the password before entering the
configuration.
Fig. 6.4. Methods for direct entry to
Logical channel
configuration
(1)
and
Group
configuration
(2)
6.3.3.
Data panels
A significant part of the screen is used for channel visualisation. Data can be presented
in one of the following modes:
–
as numerical values,
–
as charts,
–
as bars,
–
as needle dials,
–
as
SCADALite
view.
All the channels of the current group are simultaneously presented in the same mode. In
the current version of software there is no possibility to mix different modes in one view.
Figures
show examples of different views. Switching between visualisation modes
can be performed by pressing the buttons
[MODE
↑
]
or
[MODE
↓
]
in the
Navigation bar
(see
Chapter 6.3.2. Navigation bar
). Switching between groups can be performed by pressing the
buttons
[GROUP
↑
]
or
[GROUP
↓
]
.
39
1
2
