Simex MultiCon CMC-99/141, User Manual

Page: 98 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.50. Input channels menu – parameters specific for Hardware Output Monitor mode
Source parameter in the Hardware output monitor mode
After pressing
Source
, a list of available hardware outputs appears. The selected option will
be the source of data for that logical channel. An example list of available hardware outputs
for the device with only one output module such as
R81 - 8 relay outputs module
(see Appendices 8.13. R45, R81, R65, R121 - RELAY MODULES ) is shown in Fig. 7.51 .
Source for the Hardware output monitor mode can be (in the same order as in the list in
the device - see Fig. 7.51 ):
– installed hardware output modules in the respective slots A, B or C (see
Fig. 4.8
)
-a list of modules currently available is on the website; more about the output
modules in
Chapter 7.10. BUILT-IN OUTPUTS
,
– built-in Sound signal output is always marked as Out.X1: Sound signal - more
about the Sound outputs is in Chapter 7.10. BUILT-IN OUTPUTS ,
– built-in Virtual relays marked as Out. V1 - V16 - more about Virtual relay in Chapter
7.10. BUILT-IN OUTPUTS
.
See Fig. 4.8
Fig. 7.51. Sample list of available hardware outputs
98
R81 module
8 relay outputs
Built-in
Sound output
Built-in
Virtual relay
Slot X (built-in slot)
Output 1
Slot V (built-in slot)
Output 2
Slot C, Output 7