User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
–
Line width
– sets the width of the line:
•
1 pixel
- the chart line one pixel width,
•
2 pixels
- the chart line two pixels width,
•
3 pixels
- the chart line three pixels width,
–
Time scale
– time window which displays a chart which contains samples from
the last:
•
19 sec.
•
48 sec.
•
95 sec.
•
3 min.
•
6 min.
•
12 min.
•
30 min.
•
60 min.
•
2 h
•
4 h
•
8 h
•
16 h
•
24 h
•
3d
•
7d
Each group displays samples in the time window (defined in
Time scale
parameter in
Groups
When the
Time scale
is set as
30 min. or more
, the device has a possibility to
display all the samples which were measured to present the moment and can fit in
this
Scale
(no matter if the device was on or off, see
). Samples which
were not measured will be:
displayed as “0”, when the time when the device was off does not fit between
moving vertical markers on the screen
repeated on the screen, until new samples after turning on the device occur,
when the time the device was off does fit between moving vertical markers on the
screen
When
Time scale
is set as
less then 30 min.
the device has a possibility to
display only those samples which were measured from the moment when the device
was turned on to the present moment (but they must fit in the
Scale
Fig. 7.135. Example of displayed real signal
220
i
Present moment
Beginning of the
time window
The device is off
t
