User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.54. An example of configuration block diagram of the Modbus protocol implemented in
the device
Logical channels in Modbus mode reading registers from Slave devices that
are not connected, will return an error and instead of the value will display the
state
-ERR-
.
For more information about the Modbus protocol implemented in the MultiCon see
Chapter
101
i
Port
MB1
SLAVE Device
Address 1
Device input
Register 0
SLAVE
Device
Reg. 0
...
Reg. N
SLAVE
Device
Reg. 0
...
Reg. N
SLAVE
Device
Reg. 0
...
Reg. N
SLAVE
Device
Reg. 0
...
Reg. N
Address 1
Address 2
Address 52
Address 82
SLAVE
Device
Reg. 0
...
Reg. N
SLAVE
Device
Reg. 0
...
Reg. N
Reg. N
...
Reg. 0
SLAVE
Device
Address 82
Address 8
Reg. N
...
Reg. 0
SLAVE
Device
Address 1
Address 4
Built-in
Modbus
Master
Advanced
Port MB2
Port MB1
Port MB3
Unit
Device configuration
Hardware Inputs
Modbus
