User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
•
Transparency
– the parameter specifying transparency of a slot in relation to its
background:
◦
enabled –
slot limpidity,
◦
disabled –
no slot limpidity,
•
Set position –
this button refers to a simulated view of a group that shows the
selected background and positions of all the active slots. The position of the slot
can be selected by touching the screen in the right place - the indicated point
will be the top left corner of the indicator. The point coordinates can also be
entered in the lower left corner of the screen.
The default position of a slot is X:0, Y:0, therefore before the user changes
position, the individual slots overlap.
Fig. 7.147. Window of slot parameter
–
Group links
– this button allows the user to create a link to a given group with a view
of another group configured in
SCADALite
display mode; created link as a link
placed in the selected place on the measurement panel will transfer the user directly
to the view of indicated group,
The arrows in the top right corner of the screen allow the user to switch
between links. The middle button allows the user to directly select a
particular link from the list.
•
Linked group –
parameter specifies the group to which the user will be moved
when clicking on the link indicator activity area,
•
Group number –
parameter specifies whether the link number will be visible to
the group number referenced by the link:
◦
invisible –
number of the link group will not be visible,
◦
visible –
number of the link group will be visible.
•
Set position –
this button refers to a simulated view of a group that shows the
selected background and positions of all the active slots and links. The position
of the link can be selected by touching the screen in the right place - the
indicated point will be the top left corner of the link indicator. The point
230
i
