User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
The window with basic parameters of the
Profile/timer
Fig. 7.106. View of the configuration Profiles/timers window
The arrows placed in the upper right corner of the screen allow you to
switch between Profile/timer. The middle button allows you to select
a specific Profile/timer from the list directly.
The common parameters for
Profile/timer
are:
–
Name
– it gives the name to the Profile/timer,
–
Triggering mode
– using this parameter the user selects a way to generate
a Profile/timer, there are five modes of triggering:
•
disabled
,
•
level (gate)
– this means that the
Profile
which was configured by the user will
be generated when the source signal will have a value > 0, otherwise (if source
value ≤ 0) a defined Profile will not be generated. For more details see
Chapter
7.12.2. Profiles/timers - Triggering mode: level (gate), edge (once), edge
(retrig.)
•
edge (once)
– this means that the profile which was configured by the user
Profile
will be triggered by the rising edge signal (from values ≤ 0 to the value >
0) coming from the source signal. After the rising edge the
Profile
will be
generated in whole (once), regardless of further changes to the signal source.
For more details see
Chapter 7.12.2. Profiles/timers - Triggering mode: level
(gate), edge (once), edge (retrig.)
•
edge (retrig.)
- this means that the profile configured by the user
Profile
will be
triggered by the rising edge signal (from values ≤ 0 to the value > 0) that comes
from the source signal. However, in this mode, unlike the
edge (once)
mode a
defined
Profile
will be generated from the beginning every time the Triggering
source signal will generate an edge, whether that Profile had been completed or
not. For more details see
Chapter 7.12.2. Profiles/timers - Triggering mode:
level (gate), edge (once), edge (retrig.)
•
on time
– in this mode the
Profile/timer
is generated in selected time (using
parameter
Triggering times
). For more details see
Chapter 7.12.3.
Profiles/timers - Triggering mode: on time
–
Pause mode
– way to pause a generated Profile/timer,
•
disabled
– Profile/timer can not be paused,
187
