Simex MultiCon CMC-99/141, User Manual

Page: 115 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.8.7. Logical Channels - Controller mode
This mode allows the user to set up the PID control loop which may control the objects
and Controller output signal for display on the screen, processed in any other logical channels
or it can be the data source for output to the control and settings of any object. To create
the
controlling process
the
Logical Channel
should be set in the
Controller
mode as in
Fig. 7.60
.
Fig. 7.60. Input channel configuration in Controller mode
The parameters of the
Logical channel
in the
Controller
mode are:
– Name - it gives the name to the logical channel,
– Mode=Controller - in this parameter the user selects the source of data for
the logical channel,
– Unit - this parameter allows the user to define the unit,
– Controller number - this parameter allows the user to select a controller from the list
(1÷8). The user must configure the selected controller in the
Controllers
menu
(overview and configuration parameters that define the controllers can be found in
Chapter 7.13. CONTROLLERS ).
– Set point channel - this parameter allows the user to select a logical channel with
the set point value (see Fig. 7.61 ), the Set point channel defines the input data for
process control,
–
Feedback channel
- this parameter allows the user to select a channel with data
returned from the control system (see
Fig. 7.61
), the
Feedback channel
defines
the input data for process control,
115
disabled
Hardware input
Hardware output monitor
Modbus
Set point value
Math function
Controller
Profile/timer
Profile/timer (cycle counter)
Data from other channel
Logical channel Device configuration MENU
Mode