User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.132. Examples of
Horizontal
and
Vertical
Bars
Group views
–
Charts
– sets the chart type when a group is displayed in this mode,
•
horizontal
- time axis is in horizontal position,
•
vertical
- time axis is in vertical position,
•
phasor
– vector signal representation; each phasor is drawn based on two
logical channels, set in one of three
Amplitude and phase
blocks. The logical
channel which is set in
Slot 1 (3, 5)
parameter is responsible for the phasor
amplitude value and the logical channel which is set in
Slot 2 (4, 6)
is
responsible for the phasor phase value. The user should remember that
Graph
low
and
Graph high
parameters should be adjusted to the values that may
occur in the logical channel, because a minimal and maximal phasor value
corresponds to the values in these parameters. A phase of the phasor is module
360 function of the logical channel.
Fig. 7.133. Examples of
Horizontal
and
Vertical
Charts
Group views
Fig. 7.134 Examples of
Phasor Charts
Group views
219
