User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
UPDATE, REMOTE DISPLAY, EXPORT MANUAL AND RENEW
CONFIGURATION
); In all other devices, functionality is inactive and the following
message is displayed:
“Available after entering license”
. By using these parameters
the user can set an individual type display mode. More information about the
SCADALite
options available in
Chapter 7.14.4. Groups – SCADALite
–
Logging options
parameter block – is always visible, but it is active only in devices
which have an activated licence for logging the data (more information about the
logging license in
Chapter 7.4. DEVICE INFORMATION, LICENCE, FIRMWARE
UPDATE, REMOTE DISPLAY, EXPORT MANUAL AND RENEW
CONFIGURATION
); In all other devices the logging options are inactive and
the following message is displayed:
“Available after entering license”
. By using these
parameters the user can set a triggering mode, sample period and description of
logging. More about logging parameters see
Chapter 7.14.2. Groups - Logging
Fig. 7.138. Sample of
Group
parameters settings - all Slot set to
Logical channel
222
