manualshive.com logo in svg

Simex MultiCon CMC-99/141, User Manual

The Simex MultiCon CMC-99/141 is a versatile and user-friendly device ideal for various industrial applications. Ensure smooth operation by downloading the free User Manual from our website. This comprehensive manual provides detailed instructions on how to maximize the capabilities of your CMC-99/141. Visit manualshive.com to download now.

Share
Download
background image

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141 

7.8.11.10.  Application of Logical channel in the Hardware input mode and Data from 
other channel for FT4 module...........................................................................................

146

7.9. BUILT-IN INPUTS.........................................................................................................................

148

7.9.1. Built-in inputs - General settings.........................................................................................

148

7.9.2. Built-in inputs - Input modules.............................................................................................

150

7.9.3. Built-in inputs - Binary input Inp.X2 : Digital 24V................................................................

150

7.9.4. Built-in inputs - Demo input numbered X3, X4, X5..............................................................

151

7.9.5. Built-in inputs – Modules.....................................................................................................

152

7.9.5.1. Voltage and current measurement modules........................................................

152

7.9.5.2. Mixed UIN/UID modules......................................................................................

152

7.9.5.3. Isolated current inputs module.............................................................................

154

7.9.5.4. Analogue flowmeter modules..............................................................................

154

7.9.5.5. Pulse flowmeter modules.....................................................................................

155

7.9.5.6. Thermocouples sensor measurement modules..................................................

157

7.9.5.7. RTD measurement modules................................................................................

158

7.9.5.8. Isolated universal inputs modules.......................................................................

158

7.9.5.9. Optoisolated digital inputs modules.....................................................................

159

7.9.5.10. Optoisolated universal counters modules.........................................................

160

7.9.5.11. Optoizolated hourmeters modules.....................................................................

161

7.10. BUILT-IN OUTPUTS...................................................................................................................

163

7.10.1. Built-in outputs - General settings.....................................................................................

163

7.10.2. Built-in Output - Relays, Sound signal, Virtual relays.......................................................

165

7.10.3. Built-in output - PWM (Pulse-width modulation) mode for SSR relay output...................

169

7.10.4. Built-in output - Current output..........................................................................................

171

7.10.5. Examples of build-in output configurations.......................................................................

173

7.10.5.1.  Application of the output for R45 modules.......................................................

173

7.10.5.2.  Application of output for IO modules................................................................

175

7.11. EXTERNAL OUTPUTS...............................................................................................................

177

7.11.1. External outputs - General settings...................................................................................

177

7.11.2. External outputs - Control type: as a relay........................................................................

179

7.11.3. External outputs - Control type: as a linear output............................................................

180

7.11.4. Examples of external output configurations......................................................................

183

7.11.4.1. Application of external output for protocol Modbus in the MASTER mode.......

183

7.12. PROFILES/TIMERS....................................................................................................................

186

7.12.1. Profile/timer - General settings..........................................................................................

186

7.12.2. Profiles/timers - Triggering mode: level (gate), edge (once), edge (retrig.)......................

191

7.12.3. Profiles/timers - Triggering mode: on time........................................................................

193

7.12.4. Examples of Profile/timer configurations...........................................................................

195

7.12.4.1.  Application of the Profiles/timers......................................................................

195

7.12.4.2.  Application of the Profiles/timers triggered on time..........................................

197

7.13. CONTROLLERS.........................................................................................................................

199

7.13.1. Controllers - General settings............................................................................................

199

7.13.2. Examples of Controller configurations...............................................................................

214

7.13.2.1.  Application of the Controllers............................................................................

214

7.13.2.2.  Application of the Controllers in cooperation with heater which is controlled by 
SSR output........................................................................................................................

215

7.14. GROUPS.....................................................................................................................................

218

7.14.1. Groups - General settings..................................................................................................

218

7.14.2. Groups - Logging options..................................................................................................

224

7.14.3. Groups - Examples of visualisations of groups.................................................................

225

7.14.3.1.  Single channel - one big needle.......................................................................

225

7.14.3.2.  Three channels view - one bigger, two smaller................................................

226

7.14.4. Groups – SCADALite.........................................................................................................

227

7.15. MODBUS.....................................................................................................................................

234

7.15.1. Modbus - General settings................................................................................................

235

7.15.2. Modbus - SLAVE mode.....................................................................................................

236

7.15.2.1. Modbus SLAVE - Modbus Templates for SLAVE mode...................................

237

3

Summary of Contents for MultiCon CMC-99/141













































































































































































































































































































































Reviews:

No comments

Related manuals for MultiCon CMC-99/141

Vacon NX series Maintenance Manual preview
NX series
Brand: Vacon Pages: 64
UCS CAT Quick Start Manual preview
CAT
Brand: UCS Pages: 4
Samson 3277 Mounting And Operating Instructions preview
3277
Brand: Samson Pages: 48
Jedia JMA-5104 Operating Instructions Manual preview
JMA-5104
Brand: Jedia Pages: 12
JED Micro T470 User And Installation Manual preview
T470
Brand: JED Micro Pages: 10
JCM Technologies SESAME Rapid Installation Manual preview
SESAME
Brand: JCM Technologies Pages: 2
Lamtec ETAMATIC Manual preview
ETAMATIC
Brand: Lamtec Pages: 136
Coccolle gire plus Manual preview
gire plus
Brand: Coccolle Pages: 11
Fuji Electric FD5000 series Instruction Manual preview
FD5000 series
Brand: Fuji Electric Pages: 12
heat-timer Mini-MOD Installation And Operation Instruction Manual preview
Mini-MOD
Brand: heat-timer Pages: 36
Sabiana QCV-MB Manual preview
QCV-MB
Brand: Sabiana Pages: 60
K&K M4700B Installation Instructions Manual preview
M4700B
Brand: K&K Pages: 10
Idemia MorphoAccess VP MD Quick User Manual preview
MorphoAccess VP MD
Brand: Idemia Pages: 29
Estun E21S Installation Manual preview
E21S
Brand: Estun Pages: 41
schmersal Elan SRB 201ZH X3 Operating Instructions Manual preview
Elan SRB 201ZH X3
Brand: schmersal Pages: 6
Powtran PR5200 Series Manual preview
PR5200 Series
Brand: Powtran Pages: 36
Foxconn J20H035 User Manual preview
J20H035
Brand: Foxconn Pages: 13
VDH ALFANET 1-LS User Manual preview
ALFANET 1-LS
Brand: VDH Pages: 4

Brands by name

Popular brands

Load more brands