Simex MultiCon CMC-99/141, User Manual

Page: 237 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
– Save device template - this button allows saving of templates of predefined blocks
of input registers, for more information see Chapter 7.15.2.1. Modbus SLAVE -
Modbus Templates for SLAVE mode ,
– Device channels parameters block - this block of parameters allows the user to
define a type, data format and activity registers, the user can also preview the list of
registers to read and blocks of registers to transmit into modbus frames,
7.15.2.1. Modbus SLAVE - M odbus Templates for SLAVE mode
In the SLAVE settings menu there are 2 buttons for modbus templates:
– Load device template - this button allows to load a template with predefined blocks
of output registers. Pressing this button invokes a file selection window. Templates
can be imported into the MultiCon using a the
File Management
menu,
–
Save device template
- this button allows the user to save in templates the
predefined blocks of input registers. A saved template can be used for:
• fast copying/moving of the SLAVE device settings to another port (using
the
Load device template button),
• easy exchange of templates between different MulitCon devices (using
the
File management menu),
An example of the Modbus template selection window is shown in
Fig. 7.152
. Additional
icons are described below this figure.
Fig. 7.152. Template selection window
This button invokes the software keyboard window allowing to write or search
the template name.
This button allows the user to delete a selected template.
Navigation keys allow the user to select an appropriate template.
237