User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Manual operation of a button in the data panel
The action button in the data panel depends on the parameters from the
Latch
block
(description of the
Latch
7.8.1. Logical Channels - General
) and on the
Format
parameter in the
Displaying
parameter block (description of the
Displaying
7.8.1. Logical Channels - General settings
a)
for disabled latch function
For format:
–
numeric
and
time
– after pressing the button an edit window appears allowing to
), this value will be a source of data for that Logical
channel,
–
binary
- pressing the button causes a switch between the states (
'0'
and
'1'
) display
in the data panel in accordance with the text states set in the parameters:
Off-state
text
(channel value =
'0'
) and
On-state text
(channel value =
'1'
) in the
Displaying
parameter block,
b)
for enabled latch function
For format:
–
numeric
and
time
– after pressing the button an edit window appears allowing to
), which enters the new value that isn’t a data source for
this channel but the value stored at the time of activation of the latch function, in the
edit window the value of the button still appears a new value which will be the data
source for that logical channel by disabling the latch function,
–
binary
- pressing the button does not switch between the states (
'0'
and
'1'
)
displayed in the data panel in accordance with the text states set in the parameters:
Off-state text
(channel value =
'0'
) and
On-state text
(channel value =
'1'
) in the
Displaying
parameter block, but with each new press of the button the state of
the button is stored in the buffer and set the value of the logical channel with the
currently stored state when the latch function is disabled again.
Fig. 7.57. Manual operation of the button for numeric and binary format
104
2
3
1
1
2
