User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.127. Window with information about blocking save configuration during autotuning
process
After the successful completion of the autotuning process, in the
Save mode: ask before
save
(see
Chapter 7.7 GENERAL SETTINGS
parameter of
PID autotuning parameters
a
message will appear (
) with information about new PID coefficients, after which the
device switches to the standard configuration save window. With new PID coefficients, the
device goes to work with new coefficients. When automatically saving the configuration, there
is no window with information about the completed autotuning with new PID coefficients and
the question about saving the configuration.
Fig. 7.128. Example window with new PID coefficients
If the device will turned off during the autotuning, restarting will show the message
about the interrupted autotuning process.
If the device will be turned off before the configuration is saved with the new PID
coefficients, after the device restarted, a request to save the configuration with
new PID coefficients will occur.
212
i
i
