Simex MultiCon CMC-99/141, User Manual

Page: 202 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.117. Responses of the iner tial block depending on factor T
– Controller running modes parameter block – this block contains the following
parameters:
•
Mode
– defines when the controller will turn on:
◦ ON – always turned on,
◦ OFF – always turned off,
◦ from log. channel – turned on depending on the logical channel,
•
Source –
defines logical channel, that will be a source of run, only visible for
Mode: from log. channel
,
•
Triggering – defines the event triggering the controller work, there are the
following options:
◦
high level – triggering of start occurs when triggering channel is in high
level,
◦ low level – triggering of start occurs when triggering channel is in low level,
◦
rising edge
– triggering of start occurs when triggering channel is rising
edge,
◦ falling edge – triggering of start occurs when triggering channel is falling
edge,
– Fuzzy Logic parameters parameter block - this block has the following parameters:
• Mode – turn on the additional fuzzy logic block to the controller, available
options are:
◦
ON
– always turned on,
◦
OFF
– always turned off,
• Slew rate – defines the slew rate, (see Fig. 7.118 ),
202
0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 2
0
2
4
6
8
10
12
14
hard
medium
soft
time
In
er
tia
l b
lo
ck
r
es
po
ns
e