User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
–
Channel highlight
– a block of parameters, used to change the background
color and its mode in the logical channel. The user can set up to three different
variants of highlights, depending on the event weight, which should trigger
the highlight in this channel.
Fig. 7.46 Example of logical channel highlights
In the
Channel highlight
the user can set the following parameters:
•
Mode
– is used to change the way of the highlight displaying. There are
three options: disabled, permanent, blinking,
•
Blink period
– it appears when the
Mode
parameter is set on
blinking
. It
defines the blink period of the highlight,
•
Trig. hold time
– it is a minimal time during which the highlight variant will
be generated, even if the generating signal disappears. However, the user
should pay attention to the highlight hierarchy. If the highlight variant with
a higher number is active, and the highlight variant with a lower number
appears, the one with a lower number will be generated, even if
the
Trig. hold time
of the first one does not expire,
•
Trigger
– using this parameter; the user can choose the logical channel
which will be the source of triggering for the channel highlight. When in
the source channel, there is the value of
≤ 0
, then the highlight is inactive,
and when there is the value of >
0
, then the highlight is active,
•
Alarm level
– in this parameter; the user can choose if the highlight variant
is to be active, when the channel selected in the
Trigger
parameter, returns
an
Err
,
Hi
or
Lo
alarm:
◦
no highlight
– the selected highlight variant will not be active during
the alarm state in the logical channel,
◦
highlight forced
– the selected highlight variant will be active during
the alarm state in the logical channel,
•
Color
– in this parameter; the user can set the background color and font
color of the highlight variant,
Using the arrows placed in the upper right corner of the screen the user
can choose a highlight variant which he wants to configure. The middle
button allows a direct selection of a specific variant from the list.
88
