Simex MultiCon CMC-99/141, User Manual

Page: 10 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Assembly depth
Panel thickness
102 mm
max. 5 mm
Operating temperature
(depending on version)
0°C to +50°C
or -20°C to +50°C
Storage temperature
(depending on version)
-10°C to +70°C
or -20°C to +70°C
Humidity
Altitude
5 to 90% no condensation
up to 2000 meters above sea level
Screws tightening max. torque 0.5 Nm
Max. connection leads diameter 2.5 mm
2
Safety requirements In accordance with to: PN-EN 61010-1
installation category: II
pollution degree: 2
voltage in relation to ground: 300V AC
isolation resistance
: >20M
W
isolation strength between power supply and
input/output terminal: 1min. @ 2300V (see
Fig. 4.1
)
EMC PN-EN 61326-1
Weight
340g (only base, see
Fig. 4.8
)
* check the current list of measurement modules at the producer's website
** see the full specification in the Appendices
4. DEVICE INSTALLATION
The unit has been designed and manufactured in a way assuring a high level of user
safety and resistance to interference occurring in a typical industrial environment. In order to
take full advantage of these characteristics, installation of the unit must be conducted
correctly and in accordance with the local regulations.
- Read the basic safety requirements on page
5
prior to starting the installation.
- Ensure that the power supply network voltage corresponds to the nominal
voltage stated on the unit’s identification label.
- The load must correspond to the requirements listed in the technical data.
- All installation works must be conducted with a disconnected power supply.
- Protecting the power supply connections against unauthorized persons must
be taken into consideration.
10
!