User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
5.
Tear the paper using a jagged edge – the printer is ready to work now,
Fuse and its replacement procedure
In the device 3.15 A, type F, 5x20 mm a fuse is used and it is placed in a socket on the
). Connecting 230 V AC instead of 24 V DC (see
Chapter 8.16.2. Technical data
) can be one of the causes of a blown fuse and when the fuse
is blown it should be replaced.
To replace the fuse:
1.
Disconnect power supply from the device,
2.
Using a screwdriver turn the cap counter-clockwise,
3.
Remove the cap with the fuse,
4.
Replace the blown fuse with a new one,
5.
Place the cap with the fuse in the socket,
6.
Using a screwdriver turn the cap clockwise,
It is not allowed to supply MultiPrint using the Sensor power supply output
from MultiCon CMC-99/141.
313
!
