Simex MultiCon CMC-99/141, User Manual

Page: 177 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.11. EXTERNAL OUTPUTS
The External outputs menu is related to sending the date to a SLAVE device using
the Modbus communication protocol. In this menu it is determined what data will be send to
a SLAVE device while the configuration of the Modbus in the Master mode (for example baud
rate, define the SLAVE device, active output register list and etc.) is defined in the
Modbus
menu (see Chapter 7.15.3. Modbus - MASTER mode ).
7.11.1. External outputs - General settings
In the device there are as many external outputs as will be defined in the
Modbus
menu
(see
Chapter 7.15.3. Modbus - MASTER mode
). In case when the external outputs are not
defined or inactive then in the External outputs menu there is an empty list.
External outputs can have a control type (control type setting, see Chapter 7.15.3.2. Modbus
MASTER - Device channels parameter block ):
– as a relay ,
–
as a linear output
,
The view of the
External outputs
menu is created for two types of control: as a relay
(digital output) and a linear output (analogue output) is shown in Fig. 7.100 and Fig. 7.101 ,
respectively.
177
Device configuration
MENU
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
E-mail notifications
External outputs