Simex MultiCon CMC-99/141, User Manual

Page: 226 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.142. Single big needle example
7.14.3.2. Three channels view - one bigger, two smaller
Task:
The task is to visualize three logical channels which will present the following values:
Pressure, Temperature and Humidity.
Solution:
Let's assume that we have configured three logical channels:
– Logical channel 1 named Pressure ,
– Logical channel 2 named Temperature ,
– Logical channel 3 named
Humidity
,
(an example of logical channel configuration is shown in
7.8.11. Examples of Logical
Channels configuration
)
We need to define a Group with these logical channels to display them in one window on
the screen. To do that:
– enter the Groups menu and turn on Group 4 if it is turned off,
– in the Name parameter write Group 4 ,
– for
Channels
parameter block:
•
Slot 1 parameter set as Logical channel 1 named Pressure ,
•
Slot 2 parameter set as Logical channel 2 named Temperature ,
•
Slot 3 parameter set as Logical channel 3 named Humidity ,
•
Slot 4 ÷ 6
set as
disabled
,
– all the other parameter should be on default settings,
Next we need to define the Initial view. To do this:
– enter the General settings menu,
– for Initial view parameter block:
•
Display mode
parameter set as
needles
,
•
Displayed group
parameter set as
Group 4L Group 4
,
Finally, leave this menu and press the Save settings button. The result of just made
changes will be visible after the first measurement is called. An example of this view is posted
in
Fig. 7.143 .
226