Simex MultiCon CMC-99/141, User Manual

Page: 171 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Timing parameter block
The parameters of this block include:
– Period - the duration of one cycle of output pulse (the minimum value is 0.1
seconds),
– Minimum ON time - minimum duration of a high state (after switching to a high
state, switching back is possible after
Minimum On time
), see
Fig. 7.94
,
–
Minimum OFF time
- minimum duration of a low state (after switching to a low state,
switching back is possible after Minimum OFF time ), see Fig. 7.94 ,
Fig. 7.94. Sample of output signal of SSR relay in PWM mode
7.10.4. Built-in output - Current output
Fig. 7.95. Menu of the Passive current output
The parameters of the built-in output for the
Current outputs
module are:
–
Name
– each output already has a name given by the device and the user cannot
change it - see Fig. 7.84 ,
171
0 10 20 30 40 50 60 70 80 90 100
0
2
4
6
8
10
12
Time [s]
P
W
M
o
u
tp
u
t [
V
]
T=20s
Parameter: Minimum ON time, Minimum OFF time
t=10s (D=50%)