User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.14.
GROUPS
Groups
are the sets of 1-6
Logical Channels
collected together for clearance. To see
a detailed definition of
Group
see
Chapter 5. INTRODUCTION TO MultiCon CMC-99/141
If the MultiCon has a license for data logging, then each Group is able to log the data coming
from a Logical channel included in this Group.
7.14.1.
Groups - General settings
The arrows placed in the upper right corner of the screen allow switching
between groups to configure settings of group parameters. The middle
button allows a direct selection of a specific group from the list.
The parameters of
Groups
are:
–
Group
- each group can be:
•
disabled
- after selecting this option, the other parameters are not visible and
this group is not visible on the measuring screen,
•
enabled
- for this option the group is active,
–
Name
– it gives the name to the Group,
–
Bars
– sets the bars type when a group is displayed in this mode,
•
horizontal
- horizontal direction of bars position,
•
vertical
- vertical direction of bars position,
218
Device configuration
MENU
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
E-mail notifications
Groups