Simex MultiCon CMC-99/141, User Manual

Page: 148 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.9. BUILT-IN INPUTS
The Built-in inputs menu is directly related to the available inputs installed in the
device. The basic version includes the following inputs:
– built-in
Digital input
is always marked as
Inp.X2:Digital 24V
- more about it see
Chapter 7.9.3. Built-in inputs - Binary input Inp.X2 : Digital 24V
,
– 3 built-in Demo inputs marked as Inp.X3 : Demo , Inp.X4 : Demo , Inp.X5 : Demo -
more about them see Chapter 7.9.4. Built-in inputs - Demo input numbered X3,
X4, X5 ,
Depending on the customer's needs, input modules (a description of available input
modules is provided in
Chapter 8. APPENDICES
and the producer's website) can be installed
in respective slots A, B or C (location of slot see
Fig. 4.10
).
7.9.1. Built-in inputs - General settings
4 Built-in inputs
(
Digital input
and
3 Demo inputs
) are available in the device in the
basic configuration and also the input modules installed in the device depending on the
customer's needs. Configured inputs can be used to control any process or can be used by
any logical channel. Switch to the
Hardware input
mode in order to visualize the result, or
use for further processing.
The arrows placed in the upper right corner of the screen allow you to
switch between built-in inputs. The middle button allows you to directly
select a specific built-in input from the list.
A common parameter for all Built-in inputs is Name – each input has its own unique
name and it can not be changed – for description of this parameter see
Fig. 7.81
.
148
Device configuration
MENU
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
E-mail notifications
Built-in inputs