Simex MultiCon CMC-99/141, User Manual

Page: 149 / 332

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.81. Description of Name parameter in Built-in inputs menu
Other parameters of the Built-in inputs menu depend on the modules installed in the device.
The list of installed built-in input modules (slot tag and type of module) is in the
Device information menu in the Hardware configuration block (see Fig. 7.31 ),
In the device there are two ways to configure the hardware input:
•
using the
Configure source
button in the
Logical channels
menu in
the Hardware input mode,
•
directly using the Built-in inputs menu.
The
Built-in inputs
can be (in the same order as the list in the device - see
Fig. 7.82
):
a) installed
input modules
in the appropriate slots A, B or C (see
Fig. 4.10
) - the list of
currently available modules is on the website,
b) built-in digital input is always designated as Inp.X2: Digital 24V (see Chapter 7.9.3.
Built-in inputs - Binary input Inp.X2 : Digital 24V ),
c) built-in Demo inputs numbered X3 , X4 , X5 , (see Chapter 7.9.4. Built-in inputs - Demo
input numbered X3, X4, X5
),
see Fig. 4.10
Fig. 7.82. The view of a sample list of available built-in inputs for a device
149
i
Slot tag
Input number inside slot
Type of input
Slot A, Input 1
Slot X (built-in slot)
Input 4
I16 Module
16 current
inputs
Built-in binary
input
Built-in Demo
input