User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
•
yellow color
- It is possible to log data in the device but there is less than
20%
of total free memory remaining (to clear the memory you need to move any
important data logging files and possibly the Modbus templates onto a
removable flash drive, after which remove them from the device – for more
information see
Chapter 7.3. FILES MANAGEMENT
). Also at the moment when
free memory drops below 20% a warning will be displayed on the screen.
•
red color
- warning about the lack of space on a memory card, meaning data
logging will not be possible until space is freed in the memory (how to remove
data and exchange data with a flash drive is shown in
Chapter 7.3. FILES
•
alternately blinking green with a blue color
- when the indicator flashes blue,
the logged data is moved to memory (Note! at this time you must not turn off the
device because it may cause a loss of recently logged data).
In order to turn off the device, especially when the data logging is
ON
, it is
recommended to use the safe-off device by pressing the button
Safe-shutdown
in
6.3.2.
Navigation bar
Touching the screen at any place causes the
Navigation bar
which allows the user to switch between visualisation modes, groups and to enter the menu.
Fig. 6.3. Main window of the device – displaying the
Navigation bar
This bar contains three kinds of buttons shown in
switching between visualisation modes of a current group (for
possible modes see
Chapter 6.3.3. Data panels
Chapter
entering the main menu (see details in
Chapter
7. CONFIGURATION OF THE MultiCon CMC-99/141
switching between presented groups of logical channels
(activation and settings for
Group
view see
Chapter 7.14.
Tab. 6.1 Buttons of the navigation bar
To enter the configuration menu of a particular
Logical channel
directly, press and
hold the screen over the channel data panel for 3-4 seconds (see option
(1)
in
38
!
i
