manualshive.com logo in svg

Siemens RUGGEDCOM RX1510, User Manual

The Siemens RUGGEDCOM RX1510 is a high-performance industrial router designed for demanding environments. This versatile device ensures seamless connectivity and robust network performance. To get started with ease, refer to the comprehensive Installation Manual available for free download from our website, manualshive.com.

Share
Download
background image

RUGGEDCOM ROX II

User Guide

Chapter 5

Setup and Configuration

Viewing a List of Multiple Spanning Tree Instances

715

Parameter

Description

status

Synopsis:   

none, designatedBridge, notDesignatedForAnyLAN, rootBridge

The spanning tree status of the bridge. The status may be root or designated. This field may

show text saying 'not designated for any LAN' if the bridge is not the designated bridge for

any of its ports.

Root Priority

The bridge identifier of the root bridge.

Root MAC

The bridge identifier of the root bridge.

Bridge Priority

The bridge identifier of this bridge.

Bridge MAC

The bridge identifier of this bridge.

Root Port Slot

Synopsis:   

sm, lm1, lm2, lm3, lm4, lm5, lm6, trnk

If the bridge is designated, this is the slot containing the port that provides connectivity

towards the root bridge of the network.

Root Port Port

If the bridge is designated, this is the port of the slot that provides connectivity towards the

root bridge of the network.

Root Path Cost

The total cost of the path to the root bridge composed of the sum of the costs of each

link in the path. If custom costs have not been configured, 1Gbps ports will contribute a

cost of four, 100 Mbps ports will contribute 19 and 10 Mbps ports will contribute 100. For

the Common and Internal Spanning Tree (CIST) instance of the Multiple Spanning Tree

Protocol (MSTP), this is an external root path cost, which is the cost of the path from the

Internal Spanning Tree (IST) root (i.e. regional root) bridge to the Common Spanning Tree

(CST) root (i.e. network "global" root) bridge.

Total Topology Changes

A count of topology changes in the network, as detected on this bridge through link failures

or as signaled from other bridges. Excessively high or rapidly increasing counts signal

network problems.

Section 5.34.8.2

Viewing a List of Multiple Spanning Tree Instances

To view a list of Multiple Spanning Tree Instances (MSTIs), navigate to 

switch

 » 

spanning-tree

 » 

mstp-

instance

. If MSTIs have been configured, the 

MSTP Instance

 table appears.

Figure 826: MSTP Instance Table

If no MSTIs have been configured, add instances as needed. For more information, refer to 

Section 5.34.8.3,

“Adding a Multiple Spanning Tree Instance”

.

Section 5.34.8.3

Adding a Multiple Spanning Tree Instance

To add a Multiple Spanning Tree Instance (MSTI), do the following:

Summary of Contents for RUGGEDCOM RX1510

























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RUGGEDCOM RX1510

Vahle VCL Series Translation Of The Original Operating Instructions preview
VCL Series
Brand: Vahle Pages: 96
Rane Four User Manual preview
Four
Brand: Rane Pages: 38
Kartsana BRAVA Instruction Manual preview
BRAVA
Brand: Kartsana Pages: 36
PASCO ME-9430 Instruction Manual And Experiment Manual preview
ME-9430
Brand: PASCO Pages: 30
Velleman HQ Power VDL25BM Quick Start Manual preview
HQ Power VDL25BM
Brand: Velleman Pages: 3
iGuzzini Whisper Manual preview
Whisper
Brand: iGuzzini Pages: 36
Waterous AQUIS ULTRAFLOW Installation And Operation Manual preview
AQUIS ULTRAFLOW
Brand: Waterous Pages: 56
Wacker Neuson BS Operator'S Manual preview
BS
Brand: Wacker Neuson Pages: 34
Qnergy PowerGen 5650 Series Installation & Commissioning preview
PowerGen 5650 Series
Brand: Qnergy Pages: 10
MadLab Bleep-o-tron Quick Start Manual preview
Bleep-o-tron
Brand: MadLab Pages: 7
Veit Brisay BX 1000 Handbook preview
BX 1000
Brand: Veit Brisay Pages: 18
Marani DPA360P User Manual preview
DPA360P
Brand: Marani Pages: 35
Datavideo TBC-6000 Instruction Manual preview
TBC-6000
Brand: Datavideo Pages: 4
TiePie TP-EMI-HS6 Quick Start Manual preview
TP-EMI-HS6
Brand: TiePie Pages: 4
Auto Meter BVA-460 Operator'S Manual preview
BVA-460
Brand: Auto Meter Pages: 30
DOTLUX STYLEbutler 5137-0FW050 User Manual preview
STYLEbutler 5137-0FW050
Brand: DOTLUX Pages: 12
Giorik BE74AM Installation And Operating Instructions Manual preview
BE74AM
Brand: Giorik Pages: 21
Terex Genie GTH-1544 Operator'S Manual preview
Genie GTH-1544
Brand: Terex Pages: 65

Brands by name

Popular brands

Load more brands