Siemens RUGGEDCOM RX1510, User Manual

Page: 561 / 856

RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Managing Redistribution Metrics 529
1 2 3
Figure 611: Incoming Route Filter Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen incoming route filter.
4. Click
Commit
to save the changes or click
Revert All
to abort. A confirmation dialog box appears. Click
OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.21.8
Managing Redistribution Metrics
Redistribution metrics redistribute routing information from other routing protocols, static routes or routes handled
by the kernel. Routes for subnets that are directly connected to the router, but not part of the OSPF areas, can
also be advertised.
The following sections describe how to configure and manage redistribution metrics:
•
Section 5.21.8.1, “Viewing a List of Redistribution Metrics”
• Section 5.21.8.2, “Adding a Redistribution Metric”
• Section 5.21.8.3, “Deleting a Redistribution Metric”
Section 5.21.8.1
Viewing a List of Redistribution Metrics
To view a list of redistribution metrics for dynamic OSPF routes, navigate to routing » dynamic » ospf »
redistribute . If metrics have been configured, the Redistribute Route from Other Protocols table appears.
Figure 612: Redistribute Route from Other Protocols Table
If no redistribution metrics have been configured, add metrics as needed. For more information, refer to
Section 5.21.8.2, “Adding a Redistribution Metric” .