Siemens RUGGEDCOM RX1510, User Manual

Page: 383 / 856

RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Viewing a List of IP Pools 351
Section 5.15.13.1
Viewing a List of IP Pools
To view a list of IP pools configured for a DHCP subnet, navigate to services » dhcpserver » subnet »
{name} » options » ippool , where {name} is the name of the subnet. If pools have been configured, the IP Pool
Configuration table appears.
Figure 379: IP Pool Configuration Table
If no IP pools have been configured, add pools as needed. For more information, refer to Section 5.15.13.2,
“Adding an IP Pool” .
Section 5.15.13.2
Adding an IP Pool
To add an IP pool to a DHCP subnet, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Navigate to
services
»
dhcpserver
»
subnet
»
{name}
»
options
»
ippool
, where {name} is the name of
the subnet.
3. Click <Add ippool> . The Key Settings form appears.
1
2
Figure 380: Key Settings Form
1. Description Box 2. Add Button
4. Configure the following parameter(s) as required:
Parameter Description
description Describes the IP pool.
5. Click
Add
to create the IP pool. The
Leased Configuration
and
IP Pool Configuration
forms appear.