Ross SYNERGY 4000DR-003, Operation Manual, Page: 138 / 332

5–6 • Background Transitions Synergy Series Operation Guide (v18)
• The
WIPE
button (located in both transition groups) selects a wipe as the transition.
When performed, the video on the PST bus gradually replaces PGM video using a
wipe chosen from the Pattern Control group. At the transition’s end, PST video
completely replaces PGM , and the buses flip-flop. The
WIPE
button is mutually
exclusive with the
DISS
and
DVE SEND
buttons. Refer to the section “ Using
Wipes ” on page 6–8.
• The
DVE SEND
button (located in both transition groups) assigns control of the
primary DVE to the MLE in which the button is pressed. This action allows you to
control the DVE’s effect with the
Fader or
AUTO TRANS
button — exactly as if
it were an internal switcher effect. The
DVE SEND
button is mutually exclusive
with the
DISS
and
WIPE
buttons.
Please note that the primary DVE must be connected to the switcher frame via
RS-422 serial communications. The
DVE Send and Remote Control option must
be installed. Refer to the section “ Understanding DVE Send Operation ” for
complete details on the DVE Send feature.
• The
CUT
button (located in both transition groups) performs an instantaneous “cut”
transition between the PST and PGM bus sources. The buses flip-flop after the cut
is performed. The button itself is momentary — it does not stay lit.
• For dissolves, wipes, and DVE Send transitions, the
AUTO TRANS
button
(located in both transition groups) performs an automatic transition between PST
and PGM bus sources. The button is momentary and stays lit only during the
transition.
~
For Program/Preset auto-transitions, rates are entered in the Global Memory
System group.
~ For auto-transitions in the MLE Transition group, rates are entered in that
MLE’s Memory System group.
Refer to the section “ Auto Transitions ” on page 5–11 for additional information, and
instructions for changing auto transition rates.
Note When you press AUTO TRANS in DSK 1 or DSK 2, the DISS button
in the Program/Preset Transition group lights during the transition
interval to indicate a DSK transition in progress. Similarly, when you
press
AUTO TRANS in MLE Key Group 1 or 2 , the DISS button
lights in the MLE Transition Group . Refer to the section “ Using
Keys ” on page 7–20 for more information.
Note With the Squeeze & Tease 2D or 3D option installed, press DVE
SEND and WIPE at the same time to activate the Squeeze & Tease
Wipe function. Refer to the section “ Flying Keys in 2D ” on page 7–51
for complete details.
Note When you press AUTO TRANS in DSK 1 or DSK 2, the AUTO
TRANS button (in the Program/Preset Transition group) lights
during the transition interval to indicate a DSK transition in progress.
Similarly, when you press
AUTO TRANS in MLE Key Group 1 or
2 , the AUTO TRANS button lights in the MLE Transition Group .
WIPE
DVE
SEND
CUT
AUTO
TRANS