Ross SYNERGY 4000DR-003, Operation Manual, Page: 246 / 332

8–4 • Memory Functions and More Synergy Series Operation Guide (v18)
1. Display
The Display provides five data fields. All rates are indicated in frames:
•
REG:##
— Indicates the current memory register number.
•
Memory#
— Displays the current memory.
The preceding fields change when Squeeze & Tease 3D sequences are in use. Refer to
the Squeeze & Tease 3D/WARP Owner’s Guide for further details.
•
M:###
— Indicates the Program/Preset MLE’s transition rate.
•
D:###
— Indicates the transition rate for both DSKs.
•
F:##
— Indicates the Fade to Black transition rate.
2. Recall Section
The Recall Section allows you to recall switcher memory registers into selected MLEs.
Refer to the section “ Recalling Memory Registers ” on page 8–12 for complete
instructions on memory recall operation.
• (All Switchers) Press
ALL
to enable all MLEs for the next recall operation. The
ALL
button lights. When a bank and register are entered on the keypad, information
is recalled from memory and loaded into each MLE.
• (All Switchers) Press
MLE 1
to enable only MLE 1 for the next recall operation.
(Synergy 3 and 4 only) To recall MLE 1 plus another MLE, press the desired MLE
buttons simultaneously, e.g.,
MLE 1 + MLE 3
. (On the Synergy 2, press
ALL .)
• (All Switchers) Press
MLE 2
to enable only MLE 2 for the next recall operation.
(Synergy 3 and 4 only) To recall MLE 2 plus another MLE, press the desired MLE
buttons simultaneously, e.g.,
MLE 2 + MLE 3
. (On the Synergy 2, press
ALL
.)
• (Synergy 3 and 4 only) Press
MLE 3
to enable only MLE 3 for the next recall
operation. To recall MLE 3 plus another MLE, press the desired MLE buttons
simultaneously.
• (Synergy 4 only) Press
MLE 4
to enable only MLE 4 for the next recall operation.
To recall MLE 4 plus another MLE, press the desired MLE buttons simultaneously.
• Press
UNDO
to undo the last memory recall operation, restoring the MLE(s) to its
state immediately before the recall. For example, if you had a “fly key” effect set up
on MLE 1 and then accidentally recalled a register that included a simple wipe,
pressing
UNDO
would immediately restore the fly key effect.
UNDO turns on immediately after a memory recall has been performed, giving you
a chance to undo the operation. The UNDO button will remain On and allow the
user up to nine button presses before they press the UNDO button. On the tenth
button press, the UNDO light turns Off and the recall can not be undone. The fader
bar does not affect the UNDO status.
• Enable KEYS ONLY to recall all memory register data except for the MLE’s
PGM/PST (or BKGD/PST) crosspoints. This function allows you to retain (or hold)
crosspoints, but change the keys that are layered on top.
Note The ALL , MLE 1 , MLE 2 , MLE 3 and MLE 4 buttons can also be
used with the buttons in the Store Section to reset the entire switcher,
or selected MLEs. Refer to the section “ Software Reset ” on page 2–19
for details.
ALL
MLE
1
MLE
2
MLE
3
MLE
4
UNDO
KEYS
ONLY