Ross SYNERGY 4000DR-003, Operation Manual, Page: 60 / 332

2–18 • Control Panel Introduction Synergy Series Operation Guide (v18)
Switcher Color Scheme
Depending on the control panel option you have, your Synergy control panel may come with a
specific color scheme to identify each MLE, and specific MLE selection buttons within the various
control panel sections. If you purchased the
All White Buttons option for your Synergy control panel,
there will be no color identification for the buttons.
For example, on the Synergy 4 control panel, with the Classic Color Buttons option, MLE 2 is
completely colored with yellow push buttons. In all control panel sections that include an array of
MLE selection buttons (for example,
Global Memory System Group , Positioner Group , and DVE
Send Group ), the MLE 2 button is also colored yellow for clarity, as shown below:
Synergy 4 — MLE Selection Buttons
• The color scheme of the Synergy 2 is as follows:
~ MLE 1 buttons are colored yellow .
~ MLE 2 transition buttons are colored orange , while the Program/Preset buttons are
colored red and white .
• The color scheme of the Synergy 3 is as follows:
~ MLE 1 buttons are colored yellow .
~ MLE 2 buttons are colored orange .
~ MLE 3 buttons (Program/Preset) are colored red and white .
• The color scheme of the Synergy 4 is as follows:
~ MLE 1 buttons are colored white .
~ MLE 2 buttons are colored yellow .
~ MLE 3 buttons are colored orange .
~ MLE 4 buttons (Program/Preset) are colored red and white .
ALL
MLE
1
MLE
2
MLE
3
MLE
4
FADE
RATE
MLE 4
RATE
DSK
RATE
STORE
7 8 9
UNDO
KEYS
ONLY
EFF
DISS
RECALL
ALL
MLE
1
MLE
2
MLE
3
MLE
4
4 5 6
1 2 3
BANK 0 ENTER
MEMORY SYSTEM
White
Red
Yellow
Orange
White