Ross SYNERGY 4000DR-003, Operation Manual, Page: 62 / 332

2–20 • Control Panel Introduction Synergy Series Operation Guide (v18)
~ To reset
MLE 3
(on Synergy 3 and Synergy 4 systems), simultaneously press
MLE
3
in the RECALL column and
MLE 3
in the STORE column.
~ To reset
MLE 4
(on Synergy 4 systems), simultaneously press
MLE 4
in the
RECALL column and
MLE 4
in the STORE column.
• Resetting the Switcher from an Individual MLE
Use the following figure for reference:
Individual MLE Reset Function
~ To reset MLE 1 , in MLE 1’s Memory Group simultaneously press STORE and
RECALL .
~ To reset MLE 2 , in MLE 2’s Memory Group , simultaneously press STORE and
RECALL .
~ To reset MLE 3 (Synergy 4 only), in MLE 3’s Memory Group , simultaneously
press
STORE
and
RECALL
.
Important This feature is only available on Synergy 3 and Synergy 4 systems.
The Synergy 2 does not have an MLE Memory Group due to the
switcher’s compact size.
Note On Synergy 3 and 4 systems, the PGM/PST MLE can only be reset
using the Global Memory System Group .
7 8 9
STORE
MLE
RATE
KEY
RATE
RECALL
KEYS
ONLY
EFF
DISS
4 5 6
1 2 3
BANK 0 ENTER
MLE 1 MEMORY SYSTEM
Press simultaneously
to reset the individual MLE