Ross SYNERGY 4000DR-003, Operation Manual, Page: 229 / 332

Synergy Series Operation Guide (v18) Keying • 7–55
9. Press
Cropping H
to display the Squeeze & Tease Crop H Menu .
Squeeze & Tease Menu 1-2 — Crop H Menu
For all flying keys, use the display’s top and middle knobs to crop the key’s left and right
edges, respectively. Please note:
• The small
Cropping
box shows the source image’s original edge and the cropped
edge (dotted line).
• The large
Raster
box shows the results of the cropping within the target space.
Note that the border dynamically follows the cropped edge(s) of the source image.
10. Press
Cropping V
to display the Squeeze & Tease Crop V Menu .
Squeeze & Tease Menu 1-2 — Crop V Menu
For all flying keys, use the display’s top and middle knobs to crop the key’s upper and
lower edges, respectively. Please note:
• The
Cropping
and
Raster
boxes dynamically show the image’s cropped edges
and the results within the target space.
• In target space, all manipulations are registered to the upper left edge of the image
as described in the “important” note above.
11. Press
MORE
to display Squeeze & Tease Menu 2-2 .
Important As you crop the right edge, the right edge moves towards the left on
the display. However, as you crop the left edge, the right edge
once
again is displayed to move towards the left. This occurs because all fly
key manipulations are registered (locked) to the upper left edge of the
image. This feature gives you a constant and accurate frame of
reference when manipulating fly key images and building effects.