Ross SYNERGY 4000DR-003, Operation Manual, Page: 178 / 332

7–4 • Keying Synergy Series Operation Guide (v18)
~ Key 2 (and DSK 2 ) has exclusive use of its preset pattern function. This generator is
restricted to the first six columns of wipe patterns (as shown in the Pattern
Selection Section ), minus the circle. Matrix wipes are not available.
MLE Key Groups
The following figure illustrates the two MLE key groups for all Synergy switchers.
The controls in each MLE Key Group allow you to choose key types and key modifiers, and insert
the keys over a background using a cut or an automatic transition. Except for the
KEY OVER
and
CHAR GEN
buttons, the controls in the two groups are identical.
Refer to the section “ Key Functions ” on page 7–6 for complete descriptions of each section and
button illustrated above.
Note Because pattern generator 1 is shared, if PST PATT is enabled in
Keyer 1 , you cannot press the WIPE button in the MLE’s Transition
group. Similarly, if WIPE is enabled and you select PST PATT in
Keyer 1 , the WIPE button will turn off and DISS will be enabled.
1) Key Type Section
2) Key Modifier Section 1 3) Key Modifier Section 2
4) Key Preview Section 5) Key Transition Section
Note If you press a Key type button, the Key Type Menu will be displayed.
If the selected Key crosspoint is assigned to an external device, the
device control menus will be displayed if the Key type button is
pressed again.
MLE 1 KEY 1
SELF
KEY
ON
AUTO
SELECT
KEY
PV
KEY
OVER
AUTO
TRANS
CHROMA
KEY
FLY
KEY
PST
PATT
BORD
SHDW
OUTL
BORD
OFF
CUT
KEY
INV
MLE 1 KEY 2
MATTE
FILL
SELF
KEY
KEY
MEM
ON
AUTO
SELECT
KEY
PV
CHAR
GEN
AUTO
TRANS
CHROMA
KEY
FLY
KEY
PST
PATT
BORD
SHDW
OUTL
BORD
OFF
CUT
MASK
KEY
INV
1
2
4
5
3
MATTE
FILL
KEY
MEM
MASK