Ross SYNERGY 4000DR-003, Operation Manual, Page: 130 / 332

4–52 • Switcher Basics Synergy Series Operation Guide (v18)
DSK to DSK Swap
Use the following procedure to swap a DSK with another DSK (or with an MLE Keyer):
1. Press and hold the DSK Crosspoint that you want to swap.
2. Press either
DSK 1
or
DSK 2
(or
KEY 1
or
KEY 2
) in the second keyer’s Transition
Group . This can be the opposite DSK or a different MLE. The button that you select is
the keyer that is swapped.
3. Release both buttons. Both selected keyers swap their contents.
This concludes the procedure to swap a DSK with another DSK (or with an MLE Keyer).
Copy Matte
The Copy Matte function allows you to copy the contents of a matte generator to another matte
location on the switcher. Any button that is associated with a matte color can be used in the procedure.
The following buttons and locations are valid destinations :
• In the Mattes Group: BKGD1 , BKGD2 , BORD1 , BORD2 , PATT
The following buttons and locations are valid sources :
• In the MLE Transition Group: WIPE
• In the MLE Key Groups: MATTE FILL , BORD
• In the DSKs: MATTE FILL , BORD
• In the MLE Buses: COLOR BKGD1 , COLOR BKGD2
Use the following procedure to copy a matte color:
1. Press and hold any button associated with a matte color in the destination Matte Group .
2. Press any button associated with a matte in the source MLE or switcher function group.
The selected matte color is copied to the destination.
3. Release both buttons.
This completes the procedure to copy a matte color.
Copy Wipe
The Copy Wipe function allows you to copy a wipe pattern (and all associated modifiers) from one
MLE to another.
Use the following procedure to copy a wipe:
1. Press and hold the
WIPE
button in the destination MLE.
2. Press the
WIPE
button in the source MLE. All wipe parameters are copied to the
destination.
3. Release both buttons.
This completes the procedure to copy a wipe.
Note
Pressing
WIPE
for this procedure copies the color associated with the
wipe edge.