Ross SYNERGY 4000DR-003, Operation Manual, Page: 107 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–29
Please note:
• The MLEs themselves are always synchronous, with a fixed internal timing. Only
individual sources can become non-synchronous.
• The
N/S
LED will not light in a re-entry situation. For example, if a source on MLE 1 is
non-sync, and MLE 1 is re-entered into MLE 2 ’s program bus, the
N/S
LED will not
light on MLE 2’s program bus. The MLE is always synchronous, and in this
configuration, it is synchronously passing along a non-synchronous source.
• The
N/S
LED on an MLE Key Bus is shared between the two MLE Keyers. Note that
the
N/S
LED works in conjunction with the two green
Key Control
LEDs (which
indicate the Keyer that has control of the Key Bus buttons).
Non-Sync Indicators for Key Buses
If the N/S LED is on, check the Key Control LEDs to determine which specific Keyer
is non-synchronous.
Knobs
There are two types of rotary knobs used in all Synergy switchers:
• Continuous Rotation Knobs are used only in the System Control group, as shown in
the following figure. These knobs are provided for adjusting set up menu parameters,
scrolling various menu lists for switcher configuration, and for certain functional
adjustments such as key clips.
System Control Group — Continuous Rotation Knobs
SHIFT BLACK
BKGD
KEY
PST
CAM
1
CAM
2
CAM
3
CAM
4
CAM
1
COLOR
BKGD 1
COLOR
BKGD 2
SHIFT BLACK
CG
1
CG
2
DVE
1
DVE
2
CAM
1
COLOR
BKGD 1
COLOR
BKGD 2
SHIFT
MLE
1
MLE
1
MLE
1
BLACK
CAM
1
CAM
2
CAM
3
CAM
4
CAM
1
COLOR
BKGD 1
COLOR
BKGD 2
ON
ON
KEY2 KEY1
ON
N/S
N/S
N/S
Continuous
Rotation
Knobs