Ross SYNERGY 4000DR-003, Operation Manual, Page: 285 / 332

Synergy Series Operation Guide (v18) Custom Controls • 9–5
Programming Control Panel Functions
A custom control button can be programmed to play back a series of control panel button presses —
such as recalling memory registers, initiating auto transitions, taking a selected source, bringing up a
CG, and calling other custom control macros.
Programming Control Panel Functions
Use the following procedure to program a normal custom control button with basic functions:
1. Navigate to the Custom Controls Menu as follows:
• Press
HOME B Custom Controls
.
Custom Controls Menu
2. Select the Custom Control bank and button that you want to record to as follows:
• Use the Bank knob to select the custom control bank that you want to record the
custom control on.
• Use the
Button
knob to select the custom control button that you wish to program.
You can also press the button directly on the Synergy control panel.
3. Press Start Recording to display the Recording Menu .
Note
You can record Relative Custom Controls instead of a normal
Custom Control. Refer to the section “ Programming Relative
Custom Controls ” on page 9–9 for more information.
Note Buttons with an asterisk ( * ) or an “at symbol” (@) next to them in the
list are already programmed, however, they can be edited. Refer to the
section “ Editing Custom Control Macros ” on page 9–20 for details.
Operating
Tip
If you are programming long or looping custom controls, you should
keep at least one unprogrammed custom control. Pressing an
unprogrammed custom control button, one with no macros recorded on
it, will stop a running custom control macro.