Ross SYNERGY 4000DR-003, Operation Manual, Page: 91 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–13
3. Use the
Minutes
knob to set the length of time in minutes for the panel to fall asleep.
This concludes the procedure to set the Panel Sleep Time.
Standard Mnemonics
To use this function, you must have the Mnemonic Display option installed on your switcher. For
information about obtaining the Mnemonic Display option, contact Ross Video Technical Support.
Use the following procedure to configure settings for the Mnemonic Display option:
1. Navigate to the Personality Menu 2-4 as follows:
• Press
HOME B MORE B Setup B Personality B MORE
.
2. Press
Standard Mnemonics
to display the Standard Mnemonics Options Menu .
Personality — Standard Mnemonics Options Menu
The settings chosen here affect the overall appearance of the mnemonics displays on the switcher.
Adjustable settings include the font size, the display color, and whether or not the displays will show
the shifted crosspoint names. Display configurations can be saved to a storage device such as a floppy
disk or USB key.
Mnemonics settings selected in the Personality Menu will be referred to as the Standard settings in
the various naming menus.
Note The switcher does not act on a button push when coming out of “sleep”
mode.
The panel will not “go to sleep” if the panel is left in a disk related
menu such as the Disk Store or Disk Recall Menu .
The factory default time-out interval is 30 minutes.
When 0 is selected the panel will not enter into Sleep mode.
Note When naming BNCs, Custom Control Banks, and Custom Controls,
you can also adjust the font and color settings for those individual
displays from the naming menus. Changes to individual displays in the
naming menus are
not affected if further changes are made in the
personality menus later.
Refer to the section “ Naming BNC Inputs ” on page 6–4 for details on
naming BNCs. For information on naming custom controls, refer to the
section “
Naming Custom Controls ” on page 8–42 .