Ross SYNERGY 4000DR-003, Operation Manual, Page: 168 / 332

6–18 • Pattern Control Synergy Series Operation Guide (v18)
• Press
BKGD 1 KEY 1
to select matte generator 1. This is a shared matte generator
that is automatically selected when the following buttons are pressed in the selected
MLE:
~
COLOR BKGD 1
(on the bus row)
~
MATTE FILL
(in Keyer 1)
~
Key Types
(in Keyer 1)
When
BKGD 1 KEY 1
is selected, you can adjust the selected MLE’s color background
1, key 1 matte fill, or key 1 preset pattern border color using the three Matte Color
knobs. You can also press a Wash button and assign a color wash to the destination.
• Press
BKGD 2 KEY 2
to select matte generator 2. This is a shared matte generator
that is automatically selected when the following buttons are pressed in the selected
MLE:
~
COLOR BKGD 2
(on the bus row)
~
MATTE FILL
(in Keyer 2)
~
Key Types
(in Keyer 2)
When
BKGD 2 KEY 2
is selected, you can adjust the selected MLE’s color background
2, key 2 matte fill, or key 2 preset pattern border color using the three Matte Color
knobs. You can also press a Wash button and assign a color wash to the destination.
• Press
BORD 1
to adjust the color of Key 1 ’s optional border and shadow generator.
The Dual Border Generator option must be installed in the selected MLE. The
button is automatically selected when a border is enabled in Key 1. Refer to section
“
Bordering Keys ” on page 7–60 for more information.
• Press BORD 2 to adjust the color of Key 2 ’s optional border and shadow generator.
The Dual Border Generator option must be installed in the selected MLE. The
button is automatically selected when a border is enabled in Key 2. Refer to section
“
Bordering Keys ” on page 7–60 for more information.
• Press
PATT
to select the MLE’s main matte generator for pattern border colors.
This generator is independent of the other generators in the Matte Destination
Section . The button is automatically selected when you press
WIPE
in an MLE.
When pressed, you can adjust the selected MLE’s pattern border color using the three
Matte Color knobs. You can also press a Wash button and assign a color wash to the
destination.
3. Matte Color Knobs
The three Matte Color Knobs allow you to adjust the color of the selected matte
generator — in the selected MLE. Each knob is an “end-stop” knob. Refer to the section
“
Knobs ” on page 4–29 for additional information regarding “end-stop” knobs.
• Adjust the HUE knob to change the color of the selected matte generator. A full 360
degrees of hue adjustment is provided.
Note If PST PATT is selected in the MLE’s key 1 group, you cannot select
MATTE FILL .
Note If PST PATT is selected in the MLE’s key 2 group, you cannot select
MATTE FILL .
BKGD1
KEY1
BKGD2
KEY2
BORD
1
BORD
2
PATT
HUE