Ross SYNERGY 4000DR-003, Operation Manual, Page: 247 / 332

Synergy Series Operation Guide (v18) Memory Functions and More • 8–5
• The Keys Only function applies to different MLEs, depending upon the switcher
model:
~
Synergy 2 — Works in conjunction with the lit MLE button(s) in the Recall
Section . There are no MLE Memory groups on the Synergy 2 Panel.
~ Synergy 3 and 4 — In the Global Memory System group, the button applies
only to the PGM/PST MLE, because that MLE does not have an MLE
Memory group.
~ Synergy 3 and 4 — In the individual MLE Memory groups, the button only
applies to the associated MLE.
Please note:
~ When
KEYS ONLY
is lit, the next recall operation is “armed” to perform a
Keys Only function.
~ When off, the next recall operation recalls keys and crosspoints .
• Enable
EFF DISS
(effects dissolve) to change the way that effects are recalled.
When the button is lit (armed) and an effect is recalled, the system first recalls all
non-dissolving values, then recalls (or
slews ) all dissolving analog functions such
as border color, clip levels and pattern positions.
The
Effects Dissolve function applies to different MLEs, depending upon the
switcher model:
~ Synergy 2 — Works in conjunction with the lit MLE button(s) in the Recall
Section . There are no MLE Memory groups on the Synergy 2 Panel.
~ Synergy 3 and 4 —In the Global Memory System group, the button applies
only to the PGM/PST MLE, because that MLE does not have an MLE
Memory group.
~ Synergy 3 and 4 — In the individual MLE Memory groups, the button only
applies to the associated MLE.
Note that when
EFF DISS
is lit, the next recall is “armed” for an effects dissolve.
When the register is recalled, the effect slews from its current settings to the recalled
settings. When
EFF DISS
is off, the switcher cuts to the next register. Refer to the
section “ Effects Dissolve ” on page 8–22 for instructions.
• Synergy 2 only — Press RECALL DVE to recall a specific DVE effect from the
primary DVE. The DVE Send and Remote Control Option must be installed.
Refer to the section “ Understanding DVE Send Operation ” for instructions.
3. Keypad
The Keypad allows you to enter transition rates, fade rates, switcher memory registers,
DVE register numbers, and VTR clip numbers.
• Use buttons
0
through
9
for all numeric entry requirements, such as transition rates,
fade rates, switcher memory registers, banks, DVE registers, and VTR clips.
• Press
BANK
to select the bank of switcher memory registers that you want to store
or recall. Ten banks of 10 registers each are provided, for a total of 100 registers:
~
Bank 0 (registers 00 to 09 )
~ Bank 1 (registers 10 to 19 )
~ Bank 2 (registers 20 to 29 )
EFF
DISS
RECALL
DVE
0 9
BANK